wallet safe.
Pairing/Connecting with iRadar
In order to pair iRadar to your smartphone, go to the
Bluetooth
Settings Menu on your phone/tablet. For most
devices this is found by pressing;
Settings
u
Bluetooth
.
Press
Scan for Devices
and/or wait for the Device list to
populate and then select
iRadar
.
Pairing can take up to 30 seconds. If you are prompted to
“Accept password to pair” press
Confirm
. When iRadar
is properly paired “Connected” will be shown on iOS
products and “Paired but not connected” will be shown
on Android products.
When iRadar is properly paired and connected to your
phone the LED on the front of the unit will shine
blue
.
Note that you must open the app for the connection to be
finalized on Android devices.
For more information on pairing with
Bluetooth
devices
consult your phone’s owners manual.
If you are having trouble initializing or maintaining your
Bluetooth
connection completely turn off your smart-
phone and detector device, wait 30 seconds, and then
turn them back on.
Now that you are paired with iRadar you’re ready to start
using the Cobra iRadar app.
Downloading the App
To download the app you must enter the
iTunes Store or Google Play and search for
“
Cobra iRadar
”. Follow the onscreen
instructions to download and install the
Cobra iRadar app.
Cobra iRadar App
The iRadar app is what separates Cobra
from any other detectors out there.
Make sure to check out the Tutorial for a
full explanation of app features. The Tuto-
rial automatically is displayed the first time
you launch the app and then subsequently
can be accessed from the Menu.
Information on specific settings and
explanations of radar bands can be
found by pressing the buttons in the
settings menus.
iRadar Community
As you approach a specific Threat Area
you will hear a short beep and then the
app will indicate the Cobra’s assess-
ment of the reliability of the threat.
High-Threat Area means multiple
reports have confirmed a legitimate
threat in the area recently.
Medium or Low-Threat Area means
signals have been detected but have
either not been confirmed or have not
been reported lately.
Paying attention to threat areas will allow you to be warned
of potential threats before you enter radar detection range.
Community Radar/Laser alert sharing means that you have
an entire network of users working to keep you and your
When you, or any other iRadar user, detects a radar or laser
signal the alert information is anonymously sent to Cobra’s
cloud servers. Within seconds, that information is processed
and displayed on your map as part of a Threat Area.
This can be easily wired
Powering iRadar
Plug in your Cobra iRadar detector unit
using the included cigarette lighter
adapter.
Note:
the adapter includes a USB port
that can be used to charge your smart-
phone or tablet using the manufacturer’s
charging cable.
into your fuse box so that iRadar
automatically turns on when your
car is running and does not require
professional installation.
Turn unit on. A red LED will light. Make sure the iOS/Android
toggle switch is switched to
the correct position. When switched
toward the white circle, your iRadar
will only communicate with iOS
devices. When switched toward the
green circle, your iRadar will only
communicate with Android devices.
iOS/Android Mode
Toggle Switch
Power/Volume Wheel
RA-PSC B
COBRA LASER DETECTORS
GPS RADAR DETECTOR
