manualshive.com logo in svg

Cobra Intenna CP-2506, Руководство по эксплуатации

Поделиться
Скачать
Cobra Intenna CP-2506 Скачать руководство пользователя страница 8

Wall Mounting Instructions

The following steps enable installation on a 

new or existing telephone wall-

mounting plate or directly onto a wall. 

(Your Cobra 

Intenna

is designed to

be used with any AT&T, GTE, local phone company or other wall-mounting
plates that can be purchased from most local electronics stores.)
¥

Press telephone cord into slots under the base and wrap around cord-
storage area (as shown in diagram #2, below).

¥

Plug modular phone connector into telephone wall jack; attach the pow-
er adapter to the POWER connection (on the base of the phone) and
plug into to a household AC power outlet.

¥

Align mounting studs on the plate to the holes on the bottom of the
INTENNA base; push base onto studs and slide down on the wall plate.

To install 

directly on any wall

, youÕll need to provide two screws and wall

anchors; follow these steps:
¥

Drill two holes 3 1/4Ó apart and insert the wall anchors.

¥

Drive the screws into the anchors until the head of each screw is 
protruding about 1/8Ó from the wall.

¥

Align the holes in the cordless base over the screw heads; push base

in and slide down on screws (see diagram #3).

¥

Plug modular phone connector into telephone wall jack; attach the
power adapter to the POWER connection (on the base of the phone; see
p. 4) and plug into to a household AC power outlet.

Note:

Make sure you have charged the handset at least 12 hours before use.

Screw Heads

Diagram #3:

Installation

directly on a wall

Mounting Studs

Diagram #2:  In-

stallation on a

telephone wall-

mounting plate

Cord

Storage Area

Modular Phone Jack

Modular Phone Jack

7

CP-2506.qx  11/12/97 12:35 PM  Page 8

Содержание Intenna CP-2506





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды