![background image](http://html1.mh-extra.com/html/cobra/intenna-an-8591/intenna-an-8591_operating-instructions-manual_2630198006.webp)
Quick Set-Up Guide
The following basic steps enable quick and easy installation of your new
Cobra INTENNA Cordless Phone Answering System for use on a desk or
countertop. You are encouraged to review this complete instruction manual
to become familiar with all of the operating instructions and features of your
new phone.
NOTE: Before using, connect your new system to AC power (see instruc-
tions below) to charge it overnight (at least 12 hours) for optimum condi-
tioning of the rechargeable battery inside the cordless handset.
1.
Insert round connector of power adapter into POWER jack (at rear of
cordless phone’s base; see diagram #1 below) and thread cord through
cord lock guide to prevent accidental disconnection of power. Plug
power adapter into a standard 110 VAC household electrical outlet.
Then place handset in base (either standing up or lying down) so
CHARGE indicator lights (see p. 12). See below.
2.
After charging, remove the twist-tie from the phone cord and plug the
modular telephone connector into the phone jack on your wall (see
above).
3.
Make sure that the RINGER switch is ON (located on handset; see p. 11
for details).
4.
Set the PULSE/TONE switch (at the side of the base) for proper opera-
tion (see page 11 for details).
Note:
Make sure you have charged handset in base 12 hours before
using.
Diagram #1
Connecting
power and
telephone
BASE UNIT—
REAR VIEW
ELECTRICAL OUTLET
CORD LOCK GUIDE
MODULAR PHONE JACK
POWER
AC POWER JACK
①
①
≠
HANDSET
≠
5
①