3
O P E R AT I O N •
S E T T I N G S
3
O P E R AT I O N •
S E T T I N G S
Muting an Alert
Your ESD-9230 WX allows you to quickly
turn off an audio alert by momentarily
pressing the MUTE button. If you press the
MUTE button a second time during the alert,
the audio alert will be turned back on.
Auto Mute Mode
Auto Mute will automatically reduce the
audio volume of all alerts after 4 seconds
for as long as the signal is detected.
The factory setting for Auto Mute is ON.
9
8
To turn
Auto Mute
off
To turn
Auto Mute
on
MUTE
button
Press and release
Procedure
Press and release
the
MUTE
button
while no alert
is occurring.
Press and release
the
MUTE
button
again while no
alert is occurring.
Tone
1 beep
2 beeps
Voice
”
auto mute off
“
”
auto mute on
“
Visual Display
none
none
Voice/Tone Setting
You can set your ESD-9230 WX to sound
alerts with either a voice or a tone. You can
change settings by using the MUTE button.
In Voice Alert™ mode you will first hear
several tones, then a voice message
announcing the type of signal detected,
followed by more tones. In Tone Alert
mode, you will hear the tones only.
The factory setting is Voice Alert™ mode.
MUTE
button
Press and hold for 2 seconds
To change from
Voice Alert™
to Tone Alert
To change from
Tone Alert back
to Voice Alert™
Procedure
While no signal is
being detected,
press and hold the
MUTE
button for
two seconds.
While no signal is
being detected,
press and hold the
MUTE
button for
two seconds again.
Tone
1 beep
none
Voice
”
tone alert
“
”
voice alert
“
Visual Display
none
none
