Cobra DG450, Руководство пользователя

Страница: 13 / 15

- 12 -
4. Carburetor
A: Drain bolt
B: Washer
Engine Oil
1. Change the engine oil.
2. Remove the spark plug.
3. Pour a tablespoon (5 - 10 cc ) of clean engine oil into the cylinder.
4. Pull the recoil starter several times to distribute the oil.
5. Reinstall the spark plug.
Clean fuel strainer
Petrol is extremely flammable and is explosive under certain conditions Do not smoke or allow flames or sparks
in the area.
Remove the fuel strainer from the fuel tank and fuel line Clean the fuel strainer (remove dirt which has
accumulated on the mesh, and check that the mesh is not broken anywhere). Reinstall the fuel strainer and fuel
line.
Storage precautions
If you choose to store your engine with petrol in the fuel tank and in the carburetor, it is important to reduce the
hazard of petrol vapor ignition. Only store your machine in a well ventilated indoor area. Store away from
appliances that could cause a spark such as electric motors or where power tools are operated. Do not locate
your machine close to an open flame such as a heater/boiler. Always store your machine with the fuel valve in an
“off” position.
Do not store your machine with high humidity as this can cause rust and corrosion.
Keep the engine level in storage. Tilting can cause fuel or oil leakage.
Removal from Storage
Always fully check your machine before use. Check your engine as described in the “BEFORE OPERATION
CHECKS
” section of this manual.
If you drained your engine before storage, re-fuel using only fresh petrol. Do not use fuel stored in containers for long
periods of time as petrol oxidizers and deteriorates which could cause difficulty when trying to start the engine.
If the cylinder was coated with oil during storage preparation, the engine will smoke briefly at startup. This is normal.