INPUT
14V 1A
OUTPUT
5V 2.4A
INPUT
5V 1.8A
Product Specification:
• Li-Cobalt rechargeable battery: 11.1V/22.2Wh
• Size:
5.60” x 3” x 0.75”
(142mm x 76.2mm x 19.05mm)
• Weight:
10.58 oz. (300g.)
• Recharge times:
3 hours/13.8V DC
15 hours/5V USB
• Starting/Peak Current:
180 Amps/360 Amps
• USB Output:
5V 2.4 Amps
6
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician
for help.
WARNING:
Any modifications made to this device that are not expressly
approved by party responsible for compliance could void the user’s authority
to operate this device.
Cobra
®
and the snake design are registered trademarks of
Cobra Electronics Corporation, USA.
Cobra Electronics Corporation™ is a trademark of Cobra
Electronics Corporation, USA.
PROPOSITION 65 WARNING: This product contains a chemical known to
the State of California to cause cancer and birth defects or other
reproductive harm.
7
Limited 1-Year Warranty:
For Products Purchased in the U.S.A.
Cobra Electronics Corporation warrants that its Cobra CPP8000 JumPack
USB Charger, and the component parts thereof, will be free of defects in
workmanship and materials for a period of one year from the date of first
consumer purchase. This warranty may be enforced by the first consumer
purchaser, provided that the product is utilized within the U.S.A.
Cobra will, without charge, repair or replace, at its option, defective
USB charger, products or component parts upon delivery to the Cobra
Factory Service Department, accompanied by proof of the date of first
consumer purchase, such as a duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product
for warranty service, but the return charges will be at Cobra’s expense,
if the product is repaired, this warranty gives you specific rights, and
you may also have other rights which vary from state to state.
Exclusions:
This limited warranty does not apply:
1.
To any product damaged by accident.
2.
In the event of misuse or abuse of the product, or as a result of
unauthorized alterations or repairs.
3.
If the serial number has been altered, defaced or removed.
4.
If the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and
fitness for a particular purpose are limited in duration to the length of
this warranty.
Cobra shall not be liable for any incidental, consequential or other
damages; including, without limitation, damages resulting from loss of
use or cost of installation.
Some states do not allow limitations on how long an implied warranty
lasts and/or do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you.
For Products Purchased Outside The U.S.A.
Please contact your local dealer for warranty information.
10
Product Service:
For any questions about operating or installing this new Cobra
product, or if parts are missing…
PLEASE CALL COBRA
FIRST
…do not return this product to the store. If this product
should require factory service, please call Cobra before sending the
product. This will ensure the fastest turn-around time on any repair.
If Cobra asks that the product be sent to its factory, the following
must be furnished to have the product serviced and returned:
1.
For Warranty Repair include some form of proof-of-purchase,
such as a mechanical reproduction or carbon of a sales receipt.
Make sure the date of purchase and product model number are
clearly readable. If the originals are sent, they cannot be returned;
2.
Send the entire product;
3.
Enclose a description of what is happening with the product.
Include a typed or clearly printed name and address of where
the product is to be returned, with phone number (required
for shipment);
4.
Pack product securely to prevent damage in transit. If possible,
use the original packing material;
5.
Ship prepaid and insured by way of a traceable carrier such as
United Parcel Service (UPS) or Priority Mail with delivery
confirmation to avoid loss in transit to: Cobra Factory Service,
Cobra Electronics Corporation, 6500 West Cortland Street,
Chicago, Illinois 60707 U.S.A.;
6.
If the product is in warranty, upon receipt of the product it will
either be repaired or exchanged depending on the model.
Please allow approximately 3 – 4 weeks before contacting Cobra
for status. If the product is out of warranty, a letter will
automatically be sent with information as to the repair charge or
replacement charge.
For any questions, please call 773-889-3087 for assistance or visit
us online at www.cobra.com.
FCC Statement:
• Lithium Cobalt rechargeable battery.
• 180 Amp Starting Current / 360 Amp Peak Current.
• 5V/2.4 Amp USB Output for rapid charging of portable devices.
• High Intensity work LED light.
• Rechargeable by 13.8 V DC car adapter or by 5V USB.
Product Features:
Starting a Vehicle:
1.
Make sure the JumPack is fully charged.
2.
Turn off all the accessories on the vehicle.
3.
Disconnect the battery cables from the JumPack.
4.
Connect the RED clamp to the POSITIVE post of the battery.
5.
Connect the BLACK clamp to the NEGATIVE post of the battery.
6.
Connect the battery cables into the jump cable port.
Be sure that the plug is firmly pressed into the JumPack.
7.
Turn the ignition key to start the vehicle. Do not crank the
ignition for more than
3 SECONDS
. If the engine is cranked
for more than
3 SECONDS
, the fuse may open. See page
5
to
see condition of fuse.
NOTE:
If your car does not start after 3 attempts, consult with
a mechanic.
If the engine starts;
8.
Disconnect the cables from the JumPack, then from the
battery posts.
9.
Leave the engine running for at least twenty minutes to
allow the vehicle battery to recharge.
10.
If the vehicle does not start on the first try,
WAIT FOR
1 MINUTE
before trying to start the vehicle again.
NOTE:
Go to www.cobra.com for instructional steps to
jumpstart a vehicle.
Charging a 5V USB Device:
To charge a 5V USB device, connect the devices’ cable to the
JumPack’s USB output. The JumPACK will turn on, and start
charging the device automatically. The light bar will indicate that
the device is charging.
LED Flashlight:
Press the Power/Flashlight/Battery capacity button for 3 seconds to
turn on the LED flashlight. Press and hold to turn flashlight Off.
8
9
START
INPUT
14V 1A
OUTPUT
5V 2.4A
INPUT
5V 1.8A
Customer Support & Trademarks:
Customer Support
Should there be any problems with this product or further information
needed on its features please visit www.cobra.com for support, frequently
asked questions, Declarations of Conformity, and the electronic manual.
For warranty and customer service information please contact the seller.
WEEE
For European Community Users
Cobra Electronics Corporation complies with Directive 2012/19/EU OF
THE EUROPEAN PARLIAMENT AND OF THE COUNCIL 4 JULY 2012 on
waste electrical and electronic equipment (WEEE).
Waste Electrical and Electronic Equipment Information
This product has required the extraction and use of natural resources for
its production. It may contain hazardous substances that could impact
health and the environment, if not properly disposed. In order to avoid
the dissemination of those substances in our environment and to
diminish the pressure on the natural resources, we encourage you to use
the appropriate take-back systems for product disposal. Those systems
will reuse or recycle most of the materials of the product you are disposing
in a sound way.
The crossed out wheeled bin symbol informs you that the product
should not be disposed of along with municipal waste and invites you
to use the appropriate separate take-back systems for product disposal.
If you need more information on the collection, reuse and recycling
systems, please contact your local or regional waste administration.
You may also contact your supplier for more information on the
environmental performances of this product.
The product label is located on the bottom of the unit.
Trademark Statement
Cobra and the snake design are proprietary trademarks of Cobra Electronics
Corporation, USA.
11
CPP8000_MANL.indd 2
5/22/15 8:55 AM
