![background image](http://html.mh-extra.com/html/cobra/chip650l/chip650l_owners-manual_2630319015.webp)
15
procedures.)
Clean the cooling fins if they’re dirty.
Operator Lever
Snapping out of gear
or not staying in gear.
Lever not all the way forward when rack comes under full
load. Push lever quicker and more forcefully into the full
forward position.
Ram has been overloaded at lower part of face. Check gear
for straightness.
Machine does not
seem
to have full chipping
power.
The belts may be too loose and slipping. Adjust or replace
belts as needed.
Operator Lever not
engaging rack with
pinion gear.
Clean wood chips or other debris from under rack.
Clean accumulated dirt from frame where carriage assembly
rests against rubber bumpers.