When using your telephone equipment,
basic safety precautions should always be
followed to reduce the risk of fire, electric
shock and injury to persons, including the
following:
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on the product.
3. Unplug this product from the wall outlet
before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
4. Do not locate base unit near water, for
example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
5. Do not place this product on an unstable
cart, stand or table. The product may fall,
causing serious damage to the product.
6. Slots and openings in the cabinet and
the bottom or back are provided for
ventilation, to protect it from
overheating; these openings must not
be blocked or covered. The openings
should never be blocked by placing the
product in the bed, sofa, rug or other
similar surface. This product should
never be placed near or over a radiator
or heat register. This product should not
be placed in a built-in installation unless
proper ventilation is provided.
7. This product should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supply to your
home, consult your dealer or local power
company.
8. Do not allow anything to rest on the
power cord. Do not locate this product
where the cord will be abused by
persons walking on it.
9. Do not overload outlets and extension
cords as this can result in the risk of fire
or electric shock.
10. Never push objects of any kind into this
product through cabinet slots as they
may touch dangerous voltage points or
short out parts that could result in a risk
of fire or electric shock. Never spill liquid
of any kind on the product.
11. To reduce the risk of electric shock, do
not disassemble this product, but take it
to qualified servicemen when service or
repair work is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause electric
shock when the appliance is
subsequently used.
12. Avoid using telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
13. Do not use the telephone to report a
gas leak in the vicinity of the leak.
14. Unplug this product from the wall outlet
and refer servicing to qualified service
personnel under the following
conditions:
A. When the power supply cord or plug
is damaged or frayed.
B. If liquid has been spilled into the
product.
C. If the product has been exposed to
rain or water.
D. If the product does not operate
normally by following the operating
instructions. Adjust only those
controls that are covered by the
operating instructions because
improper adjustment of other
controls may result in damage and
will often require extensive work by a
qualified technician to restore the
product to normal operation.
E. If the product has been dropped or
the cabinet has been damaged.
F. If the product exhibits a distinct
change in performance.
The cordless handset operates on batteries.
CAUTION:
To reduce the risk of fire or
personal injury, read and follow these
instructions:
A. Use only the battery pack supplied
with the unit or identical replacement.
B. Do not dispose of battery pack in a
fire. The cells may explode. Check
with local codes for possible disposal
instruction.
C. Since released electrolyte is corrosive
and may cause damage to eyes or
skin and may be toxic if swallowed:
C1. Do not open or mutilate battery
pack.
C2. Always replace the entire battery
pack rather than reusing one or
more cells.
C3. Do not expose batteries to heat or
flame.
D. Exercise care in handling the battery
pack in order not to “short” the
battery contacts with conducting
materials such as rings, bracelets, and
keys. The battery or conductor may
overheat and cause burns.
15. Never install telephone wiring during a
lightning storm.
16. Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
17. Never touch uninsulated telephone wires
or terminals unless the telephone line has
been disconnected at the network
interface.
18. Use caution when installing or modifying
telephone lines.
5
1-773-889-3087
NEED HELP
?
CP-720
Cobra
®
IMPORTANT
SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Power Supply Specifications
This symbol signifies that only the Cobra AC
Adapter supplied with this cordless telephone
(Part No. 768-021-N-001) should be used
Input:
AC 120V, 60Hz, 4W
Output: DC 12V, 400mA
!
