Cobra Bridge 4100, Инструкция пользователя, Страница: 7 / 13

19
4 - BASIC FUCTIONS
Foreword
As the functional characteristics of this system can be customized, the installer must mark the ones he has activated in this
manual. The standard factory set - up is shown by the dark squares.
4.1 - Controlled windows lift (confort)
Disabled Enabled
Keep button “A” pressed, when arming the allarm. The windows
close in a “controlled mode”. The windows will stop closing if the
button is release.
4.2 - Window radio control activation
If the window radio control output function is activated (page 5
line 8). When this function is activated, the windows will rise with
a 1 s delay in relation to door locking.
4.3 - Autolock - Automatic door locking mode
Disabled Enabled
Automatically locks the doors at a preset speed or 20 s after
turned on the ignition. In both cases, the doors are automatically
unlocked when the ignition is turned off.
4.4 - Automatic door locking mode selection
Automatically locks the doors, depending on the speed or time.
4.5 - Automatic alarm arming
Disabled
Enabled
The system will arm without locking the doors 2 min. after the
ignition is switched off and the last door closed. The system will
not arm if the ignition is switched on within the 2 min. period.
4.6 - Automatic immobilizer arming
Disabled Enabled
The engine immobiliser will automatically activate 2 min. after
the ignition is switched off. The LED will flash. The engine will
be immobilised. To restore motor block of the system, press key
‘B’ of the remote.
4.7 - Immobilizer alarm
Disabled Enabled
An alarm function can be added to the immobiliser automatic
arming. If enabled, an alarm is triggered 25 sec after the
instrument panel has been turned ON.
4.8 - Anti-distraction motor - block
Disabled
Enabled
After disarming with the radio control, there is a 40 s delay
within which the immobiliser rearms unless the ignition is
switched on.
Disabled
Enabled
S p eed Time
BRIDGE 4100 - Basic function
06DE2142E.pmd 11/02/2008, 11.15 19