Product Features
Using Your Radio
VibrAlert
®
and Call Alert
•
Your MicroTALK
®
radio can alert you to incoming
signals by sounding an audible call tone or an
audible tone with VibrAlert
®
.
To change call settings:
1.
Press the
Mode
button until the
Call Setting
icon flashes on the display. The current setting
(“01” v ring, “02” ring only) is displayed.
2.
Press the
Channel Up
or
Channel Down
button to
change the call setting.
3.
Choose one of the following:
a.
Press the
Mode
button to enter the new
setting and proceed to other functions.
b.
Press
Talk
or
Call
button to return to
Standby
mode.
c.
Do not press any buttons for 12 seconds to return
to
Standby
mode.
Ten Call Tone Settings
•
You can choose between ten different
Call Tone Settings
to transmit
a call alert.
To change a call tone setting:
1.
Press the
Mode/Power
button until the
letter “C” and the current call tone number
(01 through 10) is displayed. The current
call tone will sound for three seconds.
2.
Press the
Channel
Up
or
Channel
Down
button
to hear the other call tone settings.
3.
Choose one of the following:
a.
Press the
Mode/Power
button to enter the
new setting and proceed to other functions.
b.
Press
Talk
or
Call
button to return to
Standby
mode.
c.
Do not press any buttons for 12 seconds to return
to
Standby
mode.
Call Tone Setting
MEM
ESC
TRI
WATCH
SCAN
MAX
RANGE
VOL
UME
CALL
MODE
CHANNEL
T
Mode/Power
MEM
ESC
TRI
WATCH
SCAN
MAX
RANGE
VOL
UME
CALL
MODE
CHANNEL
T
Channel Button
RX
Vox
TW DCS Scan
CTCSS Mem
BURP Power Saver
T
Call Tone On/
Vibrate On
RX
Vox
TW DCS Scan
CTCSS Mem
BURP Power Saver
T
Call Tone On/
Vibrate Off
