23801 E. La Palma Ave., Yorba Linda, CA 92887 Ph. 714.692.8180 Fax. 714.692.5016
www.cobrausa-vtwin.com
01/20
2
Instruction Manual >
602-2704 / 602-2704B
Page 2 of 2
11. Always check to make sure both detachable latch pins
are fully engaged on the bottom of the mounting kit
bushing.
12. Remove the saddle bags per the instructions in the
Owner’s Manual, and make any adjustments to the
mounting kit bushings until the detachable rack goes
on and off easily and securely.
13. Once all the adjustments have been made, verify all
hardware has been tightened and reinstall the saddle
bags.
14. Before each ride, check to make sure the detachable
latch pins are fully engaged underneath the mounting
bushings.
15. Check the tightness of all the screws after the first ride
and after the first 500 miles.
DOCUMENT NO. 0018
REV. A
ITEM DESCRIPTION
QUANTITY
1
TOUR PACK MOUNT
1
2
1/4" I.D. WASHER
4
3
1/4-20 FLANGED NYLOCK NUT
4
TABLE 1, HARDWARE REFERENCE
FIGURE 2, TOUR PACK MOUNT INSTALLED
*** DO NOT *** EXCEED THE MAXIMUM WEIGHT CAPACITY OF THE TOUR PACK MOUNT,
MAX. WEIGHT CAPACITY INCLUDES TOUR PACK AND CONTENTS = 25 POUNDS.
MAKE SURE
LATCH PIN IS
FULLY ENGAGED
UNDER BUSHING
FRONT
MOUNTING
BUSHING
SOLO TOUR
PACK MOUNT
(TOUR PACK
REMOVED FOR
VISIBILITY)
DETACHABLE
LATCH KNOB
REAR
MOUNTING
BUSHING
FIGURE 1, HARDWARE INSTALLATION
ARROWS LEADING TO TOUR PACK STUDS
(OMITTED FOR VISIBILITY)