background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 58197

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to 

potential personal injury hazards.  Obey all safety messages 

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Important Safety Information

Read all safety warnings and instructions.  

Failure to follow the warnings and instructions may result in  
electric shock, fire and/or serious injury.  

 

Save all warnings and instructions for future reference.

Installation Precautions

1.  Check local surveillance 

laws before installation.

2.  Install only according to these 

instructions.  Improper installation 

can create hazards.

3. 

Do not overreach when 

installing this product.  Keep 

proper footing and balance at 

all times.

  This enables better 

control in unexpected situations. 

4.  Wear ANSI-approved safety goggles 

during installation.

5.  Keep installation area clean and well lit.
6.  Keep children and bystanders out 

of the area during installation.

7.  Do not install when tired or 

when under the influence of 

alcohol, drugs or medication.

Содержание 58197













Отзывы: