USER MANUAL
90
5.5.5 IP FILTER
IP filter helps to control the remote login devices by using Allow List and Block List to filter the
IP address.
1.
If you want to activate this function, check the
Enable
box.
2.
Choose either
Enable Allow List
or
Enable Block List
. Allow List will only allow those
IP address in the list to visit the NVR. Block List will block those IP address in the list to
visit the NVR.
3.
Choose one of the
Restricted Types
you want to set.
4.
Set the
Start IP address
and
End IP Address
.
5.
Click
Single Add
to add individual IP address.
6.
Click
Network Segment Add
to add the IP range from the start IP address to the end IP
address.
7.
Click Edit
icon to edit the IP address.
8.
Click Delete icon to delete the IP address. Choose multiple IP address, and click
Remove IP to delete multiple IP address at one time.
Содержание 57648
