Operation
Operation
31
External Speaker
External Speaker
The external speaker jack is used for remote
receiver monitoring.
Note
The external speaker should
have 8-ohm impedance and
be rated to handle at least
4.0 watts. When the external
speaker is plugged in, the inter-
nal speaker is automatically
disconnected.
Note
Cobra external speakers are
rated at 10 watts.
Note
External S-Meter indicates
receive/transmit signal
strength only.
Connect an external speaker to the external
speaker jack on the rear panel.
Connect external S-Meter to jack for use of
external S-Meter (not supplied).
1
30
To achieve the Desired Squelch Setting (DSS),
turn the Squelch control anticlockwise until
you hear noise. Now turn the control clock-
wise just until the noise stops. This is the DSS
setting.
3
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS
GA
TE
Gate set to Desired
Squelch Setting (DSS)
Setting Squelch
Continued
S-MTR EXT.SP.
+
POWER
–
2
29LXEU_MANL_ENG_vD.indd 30-31
1/11/12 10:09 AM