Setting Dynamike®
This controls the microphone sensitivity
(outgoing audio level).
To Transmit
21
To Transmit
Transmit
TalkBack
20
Setting
Dynamike®
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged
transmitting without an
antenna, or a poorly matched
antenna, could cause damage
to the transmitter.
Be sure to read the F.C.C. Rules
and Regulations included with
this unit before transmitting.
Operation
Operation
1
Select
desired
channel.
1
Initially, set fully
clockwise
so that maximum
voice volume is available. Dynamike® may have
to be reduced in some conditions.
Transmit
Push and hold
mic button to transmit.Transmitter
is now activated.When transmitting, hold the
microphone two inches from your mouth and
speak in a clear, normal voice.
Release
to receive.
1
Setting TalkBack
This control is used to adjust the desired amount
of modulation talk back that is present at the
speaker during transmit. At fully
counter-clockwise
position the talk back is off.
