Operation
Operation
PA (Public
Address)
25
24
PA (Public Address)
Connect an external PA speaker to the PA jack
on the rear panel.
Set
CB/PA switch to PA position.
Push and hold
microphone button and speak
in a normal voice. Your voice will now transmit
on the PA speaker.
Adjust
PA speaker volume with the
Dynamike® control.
Note
Speaker should have 8-ohm
impedance and be rated to
handle at least 4.0 watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
Note
Activity on the CB channel will
be heard through the PA
speaker. Adjust volume control
to a normal listening level.
1
2
3
4
29LTDCHR_MANL_vC.qx_29LTDDEJR_manual.qx 6/17/14 2:59 PM Page 24
