Cobra Marine MR HH500 FLT BT EU, Руководство пользователя

Страница: 19 / 42

VHF Marine Radio Protocols Operating Your Radio
33 Nothing Comes Close to a Cobra ®
Advanced Operation
Tri-Watch Mode
Tri-Watch mode gives you one (1) button access to scan
a total of three (3) channels of most importance to you.
Channel 16 is preprogrammed and will always be one (1)
of the scanned locations. Two (2) other channels of your
choice can be stored in the radio. These channels can be
edited and/or recalled during future engagements of
Tri-Watch mode.
NOTE
The radio must be squelched for Tri-Watch mode to
function. See page 18 for Squelch procedure.
Tri-Watch Setup
To Program or Edit the Tri-Watch Channels:
1. Press and hold the TRI-WATCH button from Marine
Standby mode for two (2) seconds to activate
Tri-Watch Setup mode. The MEM icon on the display
will turn On and the matrix will display TW MEM
ENTER 01 .
NOTE
The main channel number will flash to indicate channel
position. If there is no input activity for 15 seconds, the
radio will sound three (3) beeps and return to Marine
Standby mode.
2. Press Channel Up/Down button to select the desired
Tri-Watch channel.
3. Press and release TRI-WATCH button or
Call/Enter/Setup button to confirm entry.
4. Repeat steps 2 and 3 to program the remaining
additional Tri-Watch memory channel.
5. After programming both Tri-Watch memory
channels the radio will immediately engage
Tri-Watch mode.
TW
ESC
MEM
ENT SET
CALL
TRI-WATCH Button
MEM SAME ATIS VOX LO MEDHI
VHF
T
R
A
B
GMRS
X
C I U
TRI and MEM Icons
ENT SETUP
CALL
MARINE HH50
Channel Up/Down Button
VHF Marine Radio Protocols Operating Your Radio
32 English
Advanced Operation
Using Tri-Watch
Tri-Watch Scan Mode:
1. From Marine Standby mode, press the TRI-WATCH
button. The TW SCAN will display on the matrix
along with the three marine channels stored in the
Tri-Watch memory.
2. The radio will scan through the three (3) Tri-Watch
memory channels.
3. A signal on any one (1) of the three (3) channels will
stop the scan for 10 seconds to allow you to listen to
the traffic on that location.
NOTE
After the Tri-Watch scan stops to monitor a channel,
as long as you do not press any buttons within 10
seconds, your radio will automatically resume
scanning the Tri-Watch channels.
4. Press the Channel Up/Down button to resume
scanning the Tri-Watch channels or to change the
scan direction.
5. To EXIT the Tri-Watch scan, press the TRI-WATCH
button again, and the radio will return to Marine
Standby mode.
TW
ESC
MEM
ENT SETUP
CAL
TRI-WATCH Button
MEM SAME ATIS VOX LO MEDHI
VHF
T
R
A
B
GMRS
X
C I U
Tri-Watch Scan Mode
500_VHF_Body_v8_MRHH330_ENG_Body 3/26/13 11:13 AM Page 32