background image

Nothing Comes Close to a Cobra

®

45

44 English

Operating Your Radio

Operating Your Radio

Position Request Reply Type

The ability to send your position to another station is an added feature of DSC radios that have 

GPS attached. It is handy for rendezvous and rescue situations.
Your CobraMarine VHF radio allows you to choose whether to have the radio automatically 

respond to all 

Position Requests

 it receives or to alert you to a 

Position Request

 and allow 

you to choose whether to respond or not — manual reply.

   

To Set The Position Request Reply Type:

  

1.

  Enter the 

DSC SETUP MENU

 menu and scroll to 

  

 

POSITION REPLY

 with the 

Up/Down soft keys

 or the  

  

 

UP/Down channel buttons.

  

2.

  Press the 

ENTR

 soft key and observe the current    

   

  highlighted  setting — 

AUTO or MANUAL

.

  

3.

  Use the 

Up/Down soft keys 

or the 

Up/Down channel  

  

 buttons

 to change the setting.

  

4.

  Press the 

ENTR

 soft key to select the setting and return  

  

 to 

the 

DSC SETUP MENU

.

Auto Channel Switch

 The ability of your radio to automatically switch to the requested channel when receiving 

an Individual Call. In some cases, automatically switching channels may not be wanted, 

especially if the radio is being used for Bridge to Bridge communications in a busy port 

or waterway.
Your CobraMarine VHF radio allows you to choose whether to have the radio automatically 

Change channels to the requested channel in an Individual Call or not. 

   

 To Set The Automatic Channel Switch On or Off:

  

1.

  Enter the 

DSC SETUP MENU

 menu and scroll to 

AUTO   

   

  CHANNL SWITCH

 (Automatic Channel Switch) with the 

Up/ 

   

  Down soft keys

 or the 

UP/Down channel buttons

.

  

2.

  Press the 

ENTR

 soft key and observe the current highlighted   

  

 setting 

— 

ON or OFF

.

  

3.

  Use the 

Up/Down soft keys

 or the 

Up/Down channel buttons  

   

  to change the setting.

  

4.

  Press the 

ENTR

 soft key to select the setting and return to  

  

 the 

DSC SETUP MENU

.

Individual Call Reply

The Individual Call Reply feature is used when receiving Individual DSC calls. When receiving a 

Individual DSC Call, you may not want the radio to reply to the call automatically. This features 

allows you to disable the automatic reply. The ability to send your position to another station 

is an added feature of DSC radios that have GPS attached. It is handy for rendezvous and 

rescue situations. 

 

Digital Select Calling (DSC) 

Setup

Digital Select Calling (DSC) 

Setup

exit         entr

  DSC Setup menu

group mmsi dir

position reply

individ directory

exit         entr

  position reply

manual

   

auto

exit         entr

auto chanl switch

off

   

on

   

To Set The Individual Reply Auto or Manual:

  

1.

  Enter the 

DSC SETUP MENU

 menu and scroll to 

  

 

INDIVID CALL REPLY

 (Individual Call Reply) with the  

  

 

Up/Down soft keys

 or the 

UP/Down channel buttons.

  

2.

  Press the 

ENTR

 soft key and observe the current  

 

   

  highlighted  setting — 

AUTO or MANUAL

.

  

3.

  Use the 

Up/Down soft keys 

or the 

Up/Down channel   

  

  buttons

 to change the setting.

  

4.

  Press the 

ENTR

 soft key to select the setting and return  

   

  to the 

DSC SETUP MENU

.

Manual Entry

 The Manual position entry feature allow you to enter the time (UTC time), Latitude and 

Longitude.  

  

 To Enter the Time, Latitude, and Longitude:

  

1.

  Enter the 

DSC SETUP MENU

 menu and scroll to 

MANUAL ENTRY

  

   

 

with the 

Up/Down soft keys

 or the 

UP/Down channel buttons

.

  

2.

  The cursor will begin to blink at the first number of the   

   

 

UTC time entry.

3.

  Use the 

Up/Down soft keys

 or the

 Up/Down channel buttons

 to scroll through the  

 

number list.

4.

  Press the 

ENTR 

soft key to select a number. This will also move the blinking cursor to the  

 

next number under UTC Time.

5.

  Repeat steps 5 and 6 to enter additional numbers.

6.

  After entering the UTC time, press the 

ENTR

 soft key to move the blinking cursor to the  

 

first number under 

LAT (Latitude)

.

7.

  Use the 

Up/Down soft keys

 or the 

Up/Down channel buttons

 to scroll through the  

 

number list.

8.

  Press the 

ENTR

 soft key to select the first number and move the cursor to the next  

 

number under LAT.

9.

  Repeat steps 9 and 10 until the seventh (7) digit of the LAT is entered.

10. 

After entering the LAT (Latitude), press the 

ENTR

 soft key to move the blinking cursor to the  

 

first number under LON (Longitude).

11. 

Use the 

Up/Down soft keys

 or the 

Up/Down

 

channel buttons

 to scroll through the  

 

number list.

12. 

Press the 

ENTR 

soft key to select the first number and move the cursor to the next  

 

number under LON.

13. 

Repeat steps 9 and 10 until the eighth (8) digit of the LON is entered.

14. 

Press the 

ENTR 

button to save the entry and the radio will return to the 

DSC SETUP MENU

.

MENU EXIT:

 You can exit the menu at any time by pressing the 

EXIT

 soft key on any screen. This 

method will exit to the next highest menu, repeated presses of the 

EXIT

 soft key will return the 

radio to the radio standby mode. The menu 

EXIT 

selection in the menu screen will return the radio 

immediately to the radio standby mode. When in the menu, just scroll down until the 

EXIT

 option is 

highlighted, then press the 

ENTR

 soft key. 

  

exit         entr

indivi cALL REPLY

manual

   

auto

exit         entr

  

call reply

   

manual  

unable      emerg

exit

lat  __ __.___

utc __:__

  Manual Entry

entr

lon ___ __.___

o
o

MRF77E_MANL_OPERATION.indd   44-45

5/7/15   2:50 PM

Содержание MR F77B GPS E
















































Отзывы: