3.2 PRODUCT OVERVIEW (See figure 1)
Item Component
01/1
Saw chain
01/2
Chain bar
01/3
Quick-tension chain wheel with central lock and rotating ring
01/4
Hand guard
01/5
Handle
01/6
Battery
01/7
Throttle lever
01/8
Locking button
01/9
Rear handle
01/10
Cover for chain sprocket
01/11
Bumper spike
01/12
Cap of the chain oil tank
01/13
Viewing aperture of the chain oil tank
4. ASSEMBLY
WARNING!
Danger of serious injury.
If an incorrectly assembled chain saw is used, serious injury can be caused.
■
Only use the chain saw when it has been completely and correctly prepared.
■
Before each use, perform a visual inspection in order to check that the chain saw is
complete and does not contain damaged or worn components. Safety and protective devices
must be intact.
CAUTION!
Danger of laceration/cutting injuries.
The sharp edges of the saw chain can cause laceration injuries when assembling.
■
Before assembly or maintenance always remove the rechargeable battery. See figure 3
■
Wear safety gloves when installing the saw chain and the guide rail.
4.1 Installing the guide rail (see figure 5 & 6)
1. Pull hand guard (05/1) in the direction of the handle (05/A) in order to release the chain
brake.
2. Turn the central lock (05/2) anti clockwise and remove together with the cover (05/3).
3. Set the guide rail (06/1) on the guide pin (06/2) and push so far back that the saw chain can
be mounted.
4.2 Installing the saw chain (figure 5 & 6)
1. Place the saw chain on the chain sprocket (06/3) and in the groove of the chain bar (06/1).
