VIF
Metapace L-42DT User Guide
© IZUM, 30. 11. 2016, VIF-NA-BG-128, V2.0
15/20
3
Printing preferences (for COBISS3 purposes)
Once the printer driver is installed, you have to update the settings on the METAPACE L-42DT
before you can start printing labels. To do so, go to
Control panel
and select
Devices and
Printers
. All available printers will be displayed. Select the METAPACE L-42DT printer and
right-click on it. From the additional options, select the
Printing preferences
option. On the first
tab (Page Setup), set up the label format by clicking
New
and entering the desired label format
(e.g.
USER (60.0 mm x 40.0 mm
) that you can then set up as the default format (
Error!
Reference source not found.
).
Figure 15: Setting the label format (New, USER (60,0mm x 40,0mm))
If you click
Advanced Options…
, you can set up the start printing position and re-adjust the
printout position on the label. Ideally, the starting position is 0.0 mm, 0.0 mm (
Error!
Reference source not found.
).