| 2021-05 User manual Minimaxx Wheelchair
7
Adjustment of the anti-tippers
The position of the anti-tippers can be adjusted in
relation the user's centre of gravity to prevent the
wheelchair tipping backwards.
Adjust the position of the anti-tippers only when
the wheelchair is empty.
1. Unscrew the screws on the wheelchair frame
above the anti-tippers and remove them.
2. Move the anti-tipper up or down as required
and reinsert the screws. Make sure that the screw
with the inside thread protrudes completely from
the backrest tube.
3. Retighten the screws.
Attempt to tip the wheelchair backwards to check
that the anti-tippers prevent the wheelchair from
tipping over backwards.
5. Settings, continued
Minimaxx Wheelchair can easily be folded for
transportation in motorised vehicle.
1. Remove the wheelchair cushion.
2. Grasp the center of the seat with one hand. Pull
up the seat, after which the wheelchair contracts.
Do not use Minimaxx Wheelchair as a seat in a
motorised vehicle since it is not crash tested.
5.1 Foldable for transport
Minimaxx Wheelchair should be stored in the dark
and covered with a blanket or similar.
Minimaxx Wheelchair should be stored between -
10 ° - 50 ° C in terms of temperature.
Check regularly that the wheelchair has not
become wet or has suffered other damage during
storage.
5.2 Storage (incl. Long-term storage)
