Solo 1W Amplifier
Part A - User Guide
Operating your Solo 1W Amplifier
SOLAMP1W-User-Guide-R1.doc
8
DS000041 Unclassified
You’ll need a SOLO4 transmitter/Power Amp combo and a CA0074-2 Enable cable.
1. Connect the Hirose 16-way end to the Hirose jack on the transmitter.
2.
Connect the Lemo OB 3-way plug (m) twin key to the Lemo OB 3-way jack (f) twin
key on the Power amplifier.
3.
The remaining Lemo OB 3-way plug (f) single key is left unattached.
Note
: This remaining Lemo OB plug is used to connect your control cable (CA0001)
for
configuring the transmitter now that the Hirose you’d normally use is occupied.
Note
: There is a second version of this enable cable where the remaining Lemo OB 3-way
plug (f) is used for Data instead of control to enable you to still get data out of the unit
now that the Hirose you’d normally use is occupied.
01-40 Specification:
Input
RF In
SMA
RF Enable
Hirose
Power
3 pin OB Lemo
Output
RF Out
TNC
RF
Frequency Bands
1.00 to 2.50 GHz
Power In
100mW
Power Out
1W
Gain
10dB
Power Ripple
+/- 1dB across band
Output Matching
Matching Circuit immune to open or short
Physical
Dimension
L 95mm, W 70mm, H 32mm
Weight
350g
Power
DC Input
9 to 16V Reverse Polarity Protected
Power Consumption 10W typical
Environment
Temperature Range -20 to +70 deg C
Product Code:
SOLAMP1W-100250