manualshive.com logo in svg

COBHAM SAILOR 6560, Руководство пользователя

Поделиться
Скачать
COBHAM SAILOR 6560 Скачать руководство пользователя страница 49

39

Chapter 3

33333

Service & maintenance

Service & maintenance

3

This chapter has the following sections:

•

Maintenance

•

Troubleshooting guide

•

Service and repair

Maintenance

Maintenance of the GNSS/DGNSS Receiver and antennas can be reduced to 
a maintenance check at each visit of the service staff. Inspect the unit for 
mechanical damages, salt deposits, corrosion and any foreign material. Due 
to its robust construction and ruggedness the unit has a long lifetime. 
Anyway it must carefully be checked at intervals not longer than 12 months 
– dependent on the current working conditions.

Contact for support

Contact an authorized dealer for technical service and support of the 
GNSS/DGNSS Receiver and antennas. Before contacting the authorized 
dealer you can go through the troubleshooting guide to solve some of the 
most common operational problems.

Software version

• GNSS/DGNSS Receiver: 

Tap 

System > Applications.

Tap the icon in the upper right corner
Tap 

Device List

Tap the GNSS/DGNSS Receiver.

• GNSS/DGNSS App: Tap 

System > Applications > DGNSS

• Control Panel: Tap

 System > About > Version

On these pages you also find the serial number of the unit.

Содержание SAILOR 6560









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды