COBHAM SAILOR 6560, Руководство пользователя

Страница: 41 / 72

Chapter 2: Operation
Alert and notification management 31
22222
Operation
4. Change the setting and tap Apply .
When leaving Settings , it is locked again.
For information how to change the user level password see the installation
manual of the Control Panel.
Alert and notification management
Alert management is handled by the Control Panel. Note that the following
description is a general description of alerts and notification.
Introduction to alerts and notifications
Alerts are reported and indicated by icons in the bottom bar of the Control
Panel display. An alert is presented together with its alert text. An alert can
be of the type alarm, warning or caution. If an alarm is not acknowledged
the audible alarm signal (3 beeps) is repeated every seventh second until it
is acknowledged. If a warning is not acknowledged the audible warning
signal (2 beeps) is repeated every minute until it is acknowledged. The
audible warning signal also disappears if the condition is rectified.
The alert list is prioritized. The most important alert is an alarm, then
warning and finally caution. The most important active alerts move to the
top of the list, after that the alerts with the same importance are sorted by
activation time.
You can display the current list of active, unacknowledged alerts and
notifications by tapping the lower right corner of the Control Panel display
where the alert indication and UTC time is displayed.
Note The GNSS/DGNSS Receiver reports alerts of the type warning or
caution.