COBHAM SAILOR 6249 VHF, Руководство пользователя

Страница: 33 / 58

Chapter 2: Operation
Setup 19
22222
Operation
Accessing a setup page
To change a setting in one of the
SETUP
pages, do as follows
1. Press the soft key
SETUP
.
2. Press the arrow soft key or to advance to
SETUP
page you want
to edit.
3. Turn the selector knob to go to a setting, then press the selector knob to
change the setting.
4. Press
EXIT
to return to normal radio operation.
Radio setup
Parameter Description
Scan Hang
Time
Scan hang time, in seconds on an active receiving working
channel. The time is measured from the signal is detected. The
radio remains on the channel for the set time interval, if a signal
was detected.
OFF
: Resumes scanning when signal disappears (default)
4, 6, 8, 10:
Hang time in seconds.
Scan
Resume Scan resume time, in seconds. When the programmed time of
inactivity has elapsed, and when watch/scan has been aborted
using a press on PTT, or after power-up, scan or watch is
resumed.
OFF
: Automatic resume is deactivated (default)
3, 6, 10, 15, 20, 25, 30:
Resume time in seconds.