Chapter 2: Operation
8
General use and navigation
Once programmed, you can see the MMSI
number in the service line directly after start-up.
The DSC functionality is operational at any time.
The message
NO DSC (NO MMSI)
is shown in
the action line if the MMSI is not programmed.
Position and MMSI Information
To display position and MMSI information for the SAILOR 6215 VHF DSC
radio, do as follows:
1. Press the soft key
POS
. If it is not in the display, press the soft key
MORE
until
POS
appears.
The display shows the current (latest) position (if a GPS is connected),
the UTC and position type, GPS Status and MMSI.
2. You can enter the position and UTC manually. Turn the selector wheel
knob to select the value you want to change. Then press and turn the
selector wheel knob to enter the current position or UTC time. The
display shows
Man Position
.
3. Press the soft key
SAVE
to save the new value.
4. After you have entered a value manually or overruled the GPS input, a
soft key
UseGPS
appears in the display if the GPS is available. Press this
soft key if you decide to use the data from the connected GPS.
5. Press the soft key
EXIT
to return to normal use.
If the GPS was present and then disappears a warning appears in the display
after 10 minutes. Follow the instructions on the screen.
Содержание Sailor 6215 VHF DSC
