Technical specifications
98-141370-A
www.cobham.com/satcom
System configuration - example
Item
Specification
Antenna weight
3.94 kg (8.7 lbs)
Antenna dimensions
291.9 mm x Ø 275.6 mm (11.5” x Ø10.9”)
Terminal weight
2.2 kg (4.9 lbs)
Terminal dimensions
231 mm x 278 mm x 41 m (9.1” x 10.9” x 1.6”)
Safety distance to antenna
0.6 m (23.7” )
Power input for terminal
Nominal 12-24 VDC (10.5 - 32 V DC; 11.5 A - 4 A)
Ambient temperature
Operational: -25° to +55 °C
Relative humidity
Antenna
Terminal
100% condensing
95% non-condensing at +40 °C
To verify the successful installation of the SAILOR Fleet One System, do the following:
1. Insert your SAILOR Fleet One SIM card into the SIM slot (see the picture to the
left)
2. Switch on the terminal using the on/off button.
3. Verify that the Power indicator on the terminal lights green.
4. Connect a computer to one of the LAN connectors.
5. Open your browser and type in the IP address of the web interface (default
192.168.0.1) to access the built-in web interface.
6. The Status field in the web interface shows the progress (Scanning - Searching -
Registering - Ready).
7. Wait until the Status field shows Ready.
8. Connect your phone or computer and verify that you can make a call or con-
nect to the Internet.
For details on installation and use of your SAILOR Fleet One, see the SAILOR Fleet One
User & installation manual.
Verifying the installation
Power LED status
Description
Off
Unit is off
On, green
Unit is on, normal operation
Flash pattern, green
Starting up
Flash pattern, orange
Shutting down
I/O connector
Pin Intended use
1
Ringer output
2
Warning/error output
3
Indicator for data connection, output
4
Control data connection on/off, input
5
Ignition input
6
Chassis GND
7
DC out, 9 - 15 VDC, 50 mA
8
DC in (Ignition input)
Connectors, pin allocation and wire colours
8
1
Power cable wires
Wire colour
Signal
Red (thick)
Vin+
Black (thick)
Vin-
Black (thin)
Not connected
Green
Remote on/off
Brown
Not connected
Red (thin)
Not connected
Orange
Remote on/off
SAILOR Fleet One antenna
SAILOR Fleet One terminal
Number Cable
Description
1
Antenna cable
Supplied with SAILOR Fleet One
2
Phone cable
Not supplied: Standard phone cable with RJ-11 connector.
3
Ethernet cable
Supplied with SAILOR Fleet One
4
Power cable
Supplied with SAILOR Fleet One
5
I/O cable
Not supplied
6
Ground cable for
Ground stud
Not supplied: Cable for connecting the Ground stud to ship
ground. Heavy wire or braid cable with a larger diameter
than the antenna cable.
Allow free space for
ventilation and cable
SIM card
Disclaimer: Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed
by Thrane & Thrane A/S. The information in this manual is provided for information purposes only, is subject to change without notice and may contain
errors or inaccuracies. The manuals are periodically revised and updated. Anyone relying on this information should acquire the most current version e.g.
from cobham.com/satcom or from the distributor. Thrane & Thrane A/S is not responsible for the content or accuracy of any translations or reproductions,
in whole or in part, of this manual from any other source. Thrane & Thrane A/S trading as Cobham SATCOM.
Copyright © 2013 Thrane & Thrane A/S. All rights reserved.
