![COBHAM EXPLORER 6075LX Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/cobham/explorer-6075lx/explorer-6075lx_quick-manual_2629905001.webp)
Introduction
This quick guide describes unpacking and assembly of the
antenna. The next page shows information on how to connect
to the Internet and how to download the full User & Installation
manual.
Assembly
The EXPLORER 6075LX antenna ships from the factory cali-
brated and ready for use.
1. Unpack the Base Unit with the antenna positioner.
WARNING
: Be aware of pinch points when handling
and installing the antenna!
2. Place the Base Unit upon level ground and deploy the two
support legs.
3. Position the antenna:
Northern hemisphere - The display faces north
Southern hemisphere - The display faces south
WARNING:
Anchor the support legs to the ground.
Especially in high wind conditions, add extra weight to the
support legs, or insert stakes through holes in the support
feet.
4. Turn the black knobs to move the feet up and down to level
the base and achieve stability.
5. Retract the two thumb screws on the mounting blocks which
are located on the elevation arms.
6. Take the RF assembly out of the case, handle it carefully.
7. Insert the RF assembly into the mounting blocks.
Push forward to make sure it is completely engaged, while
tightening the two thumb screws.
8.
Release the four locking mechanisms on the reflector hub on
the RF assembly.
9.
Unpack the four reflector panels.
10. Insert the two bottom panels and latch them along the edge
of each panel and secure the locking mechanisms at the
center hub.
11. Insert and latch the two upper panels and secure the locking
mechanisms at the center hub .
12. Take out the feed horn and mount it carefully on the RF
assembly by screwing it into the reflector hub.
IMORTANT: Hold the feed horn as shown while mounting it.
Do not touch the subreflector, it can be easily damaged.
13. Connect the cables:
BUC power
cable to circular MIL connector.
Transmit (Red, Tx)
coax cable (N) to BUC Transmit port
Receive (Blue, Rx)
coax
cable (TNC) to LNB Receive port
Power cable
to the front of the Base Unit. See next section
for details.
EXPLORER 6075LX
0.75m Stabilized Auto-Acquire Fly-Away Antenna System for Inmarsat Global Xpress
Quick guide
1
2
4
5
8
9
11
13
12
10
3
6
COBHAM PUBLIC
7
11
13