COBHAM EXPLORER 5075GX, Инструкция по установке и эксплуатации

Страница: 42 / 78

4-
18 Chapter 4: Setup and operation 98-143492-B
Keypad and display menus
4.2 Keypad and display menus
4.2.1 Keypad and display
In the display you can see the current state of the system. You can also deploy, stow and
stop the antenna, see events (warnings, errors and information) and how the system has
been configured. Use the keypad to navigate through the menu tree.
1 2 3 4 5
0DLQ 1$9:*+ 0'0: 1(72. /$1: 1 ± 3 4
$&48,6,7,21 2.
6$7: 151,2 : 5;:1-/ + 19,707/18,25 7;:0$5
6 7 8 9 Signal strength
Figure 4-16: Display and keypad of the ACU (example)
1. Current status of the EXPLORER 5075GX (examples):
ANTENNA SOFTWARE UPLOAD
ANTENNA POST
(Power-On Self Test)
READY (waiting for data from the modem or no satellite profile selected)
DEPLOYED IDLE (antenna ready)
Homing antenna (verifying antenna position)
EARLY ACQUISITION (acquiring the satellite signal, no modem communication yet))
ACQUIRING SIGNAL (acquiring the satellite signal, with modem communication)
ACQUISITION OK (signal from the GX satellite acquired)
SAFE MODE (error, followed by an error description)
2. Current menu, see The menu tree on page 4-19.
3. NAV : Navigational information
First letter: G (Valid position signal received from the GNSPS module) or g (No valid
GNSS fix)
Second letter:
H (Valid heading data) or h (No valid heading data).
4. MDM : Current status of the modem: TEST, ERROR, READY, INIT, RXOK, ACQ,
NETOK, RESET, OFF
5. LAN : LAN connectors used, 1 , 2 , 3 , 4 ,
–
.
6. SAT : Longitude, satellite position of the currently active satellite profile.
7. RX:
1 (Rx1 Lock, - or 1 ),
- (Rx2 Lock, - or 2 ),
L (RX polarisation of currently active satellite profile: L (left-hand) R (right-hand).
8. RF tracking frequency in GHz and LNB LO Frequency.
9. TX : <Modem TX> <ADU TX> <TX pol>
<Modem TX> = [m,M]
<ADU TX> = [a,A]
<Tx pol>=[-,L,R]