COBHAM EXPLORER 5075 Скачать руководство пользователя страница 26

Страница: 26 / 72

Setup with the web interface for PC

4-4

Chapter 4: Setup and operation

98-143492-D

The web interface has the following sections:

1. The navigation pane holds the main menu. Clicking an item in the menu opens a

submenu in the navigation pane or a new page in the contents section.

2. The signal status field shows the tracking signal strength. The signal strength can vary

during operation, depending on the current position relative to the satellite.

3. The icon bar shows icons for active events, when relevant, and the system status. There

is also a direct control to deploy or stow the antenna.

4. The host name is shown on every page of the web interface. The host name is useful for

identifying the system at remote login and when requesting reports from the system.
You can change the host name, see

To configure the LAN network

on page 4-6.

5. The contents section shows the page selected in the navigation pane. This section is

used for viewing or changing settings, or for performing actions.

The following icon may appear in the icon bar in the web interface:

To navigate the web interface

•

To expand a menu

, click the menu in the navigation pane.

•

To access status and settings

, click the relevant subject in the navigation pane or

click the relevant icon in the icon bar. The status or settings are displayed in the contents
section.

•

To get an overview over the submenus available

, click

SITE MAP

in the

navigation pane. Click on items in the site map to go directly to the relevant location.

Status field in the icon bar

The top bar shows the current signal strength and the current status of the antenna.

Examples

• Antenna software upload

•

Antenna POST

(Power-On Self Test)

•

Ready

(waiting for data from the modem or no satellite profile selected)

Deployed idle

(antenna ready)

•

Homing antenna

(verifying antenna position)

•

Early acquisition

(acquiring the satellite signal, no modem communication yet)

•

Acquiring signal

(acquiring the satellite signal, with modem communication)

Icon

Explanation

An event is active. Click the icon to see a list of active events. For
explanations of the event messages, see

List of events

on page B-2. Note

that this icon will remain in the icon bar as long as the event is active.

Table 4-1: Web interface: Event icon

Note

You can give access to some configuration settings for users that are not
administrators. For information see

User permissions (guest login)

on page 4-

12.

Содержание EXPLORER 5075









































































Результаты поиска

Содержание EXPLORER 5075

Отзывы:

Похожие инструкции для EXPLORER 5075

Бренды по названию

Популярные бренды

COBHAM EXPLORER 5075, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание EXPLORER 5075

Отзывы:

Похожие инструкции для EXPLORER 5075

Бренды по названию

Популярные бренды