What’s in the box
3-2
Chapter 3: Assembly & start up
98-143492-D
The cases contain the following items:
• Electronics enclosure
• RF feed assembly
• Transmit (Red, Tx) & Receive (Blue, Rx) RF cables
• BUC power cable (Gray)
• Power cable
• Hand crank
• Quick guide
• Safety summary page
3.1.2
Initial inspection
Inspect the cases immediately upon receipt for evidence of damage during transport. If the
shipping material is severely damaged or water stained, request that the carrier's agent be
present when opening the cases. Save all packing material for future use.
After unpacking the system, inspect it thoroughly for hidden damage and loose
components or fittings. If the contents are incomplete, if there is mechanical damage or
defect, or if the system does not work properly, notify your dealer.
Note
Do not grab the RF assembly by the
feed horn. The RF feed's subreflector
can be easily damaged.
Hold the RF feed as shown in the
picture.
WARNING!
To avoid electric shock, do not apply power to the system
if there is any sign of shipping damage to any part of the front or rear
panel or the outer cover. Read the safety summary at the front of this
manual before installing or operating the system.
