9
Controls
The DropCam has dual button control panel, a seven segment display
indicator and LEDs.
Button 1 is the Control Button and is coloured green. The control button
is used to enable the DropCam and allows users to cycle between 8
internally stored configurations. The internal configurations can be
programmed by connecting a local PC and using the domo PC control
GUI application, or alternatively by using the separate domo ‘Field Gun’
controller.
Button 2 is unused in normal operation, unless the unit is upgraded to
have internal 3G capability.
The use of the domo PC GUI application is described fully in section 3
‘Advanced Operation’.
The picture below shows the DropCam control panel.
Button 1 – Control Button Functions (Green Button)
Current State
Action
Next State
Off
Press and Hold for 3 seconds
On
On
Press and Hold for 3 seconds
Off
On
Press Briefly
Config number is incremented
Button 2 – 3G Button Functions – unused
(will become used when 3G upgrade is available)
Current State
Action
Next State
N/A
No Action
N/A
Control Button
Status Display
Battery LED
3G Button
