DIGIMINI EMEA/APAC/AUSTRALIA REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless
–
Coverage
Date: 11-Oct-15
www.cobham.com/wireless
Document number: 00030UMCD
Rev. 5.0
Page |
3-5
4. Verify that the Repeater is firmly mounted and
tighten
the Repeater bolts so it is secured to the
wall mount bracket.
5. To mount the Repeater Power Supply:
•
Pass two ties through the loops at the side of the bracket.
•
Position the PS on either side of the bracket, firmly on the step and secure the power supply
to the bracket using the ties.
•
Trim the ties
WARNING!!!
Do NOT connect power at this point.
Figure 3-4. Mounting Power Supply
3.5 Before Connecting the Antennas or Power
Before connecting the antennas or power perform the following procedures described in this section:
•
Verify isolation between the donor and mobile antennas
•
Verify link between the BTS and the Repeater
1. Pass ties
through loops
2. Position P.S.
firmly on
step
and
secure with ties
3. Trim ties
