COBHAM AVIATOR 200, Руководство пользователя

Страница: 54 / 126

Chapter 3: Operation
44 AVIATOR Wireless Handset functions
Quick settings
To control the volume in the earpiece
To adjust the voice volume during a call (with the display in the main
screen), press

or

on the keypad.
To use hands-free operation
To enable hands-free operation during a call, use the right select key to
select
Handsfree
. To go back to hand-held mode, press the right select key
again.
In hands-free mode the sound is routed to a speaker, so that you can use
the phone without holding it close to the ear. You can adjust the volume
with

or

as described in the previous section.
Handset in cradle:
You can also make a hands-free call by leaving the handset in the cradle
while making the call. Similarly you can answer a call using hands-free mode
by leaving the handset in the cradle while answering the call.
In both cases, the default function is as follows:
• If you remove the handset from the cradle during the call, the mode will
automatically change to hand-held.
• When the handset is out of the cradle in
hand-held
mode, the call will
be terminated when you put the handset back in the cradle.
• When the handset is out of the cradle in
hands-free
mode, you can put
it back in the cradle without terminating the call.
Note You can change this default function under
Settings > Cradle
, if
you want the handset to be independent of the cradle. For further
information, see
To set up the function of the cradle on page 63.