To assemble the EXPLORER 6075LX
98-165591-B
Chapter 3: Assembly & start up
3-5
3333
9. Release the four locking mechanisms on the reflector hub on the RF assembly.
10.Insert the bottom petals and latch them along the edge of each petal to carefully secure
the reflector petals into place.
11.Re-secure the locking mechanism for each petal on the reflector hub
12.Insert, latch and lock the two upper petals.
13.Unpack the feed horn and screw it onto the reflector hub.
Figure 3-6: Locking mechanisms for the petals
Figure 3-7: Latches to interconnect the petals
Figure 3-8: Reflector, latches
CAUTION!
Take care when handling the feed horn. The feed’s
subreflector can be easily damaged. Only touch the lower part of the feed
horn as shown in Figure 3-9.
Figure 3-9: Feed horn, mount
