EQUIPMENT MANUAL 265-16-3 REV. 1.00
265-16-3
CONFIDENTIAL AND PROPRIETARY TO COBHAM
Page 7
Table 2. Environmental Qualification Form (continued)
TYPE/MODEL/PART NO.; Model 265-[ ]
Conditions
DO-160E
Section/
Paragraph
Description of Conducted Tests
Fungus resistance
13.0
Equipment meets requirements of Category F.
Salt spray
14.0
Equipment meets requirements of Category X.
Magnetic effect
15.0
Equipment meets requirements of Class Z.
Power input
16.0
Equipment meets requirements of Categories
B and Z..
Voltage spike
17.0
Equipment meets requirements of Category A.
Audio frequency conducted
susceptibility
18.0
Equipment meets requirements of Category Z.
Induced signal susceptibility
19.0
Equipment meets requirements of Category ZC.
Radio frequency susceptibility
20.0
Equipment meets requirements of Categories
WWR.
Emission of radio frequency energy
21.0
Equipment meets requirements of Category H.
Lightning induced transient
susceptibility
22.0
Equipment meets requirements of Category B3F3X.
Lightning direct effect
23.0
Equipment identified as Category X, no test required.
Icing
24.0
Equipment meets requirements of Category A.
Electrostatic Discharge
25.0
Equipment meets requirements of Category A.
Fire, Flammability
26.0
No test conducted. Identified as Category X.
Other tests:
Acceptance tests in accordance with dB Systems acceptance test procedures 265-4 and performance tests in
accordance with RTCA Document DO-214, Section 2.8 were conducted to verify complete and proper operation
of the Model 265-[ ] qualification test unit.
Remarks:
•
Tests of DO-160D, Sections 4.0, 5.0, 10.0, 12.0, 15.0, 16.0, and 18.0 were conducted at dB Systems, Inc.
in Redmond, Washington.
•
Tests of DO-160D, Section 6.0 were conducted at
•
Tests of DO-160D, sections 7.0 and 8.0 were conducted at Cascade Tech in Portland, Oregon.
•
Tests of DO-160D, sections 17.0, 19.0, 20.0. 21.0, 22.0, and 25.0 were conducted CKC Labs in Redmond,
Washington.
•
Tests of DO-160D, section 24.0 were conducted at Smiths Aerospace in Grand Rapids, Michigan.
•
Analysis of DO-160E to DO-160D confirms compliance with DO-160E.
•
Analysis of ED56A to ED112 confirms compliance with ED112.
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number(ECCN) 7E994. When exporting, diversion contrary to U.S. law is prohibited.
