13
numbers
Remark: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, while the
second latitude & longitude is the coordinate of the bottom right corner, it will alarm at interval of 3
minutes.
Cancel: Send SMS “nospassword” to deactivate this function.
6.18.6
Multi-area management
6.18.6.1 Set Area
Send SMS command "area+pspace+latitude,lospace+areaname,distanceM" to
tracker(distance unit: M for meter, K for kilometer), it will reply "area01 ok".
Example: Send "area123456 22.353648,113.543678 school,800M".
Note: 5 areas at most and the distance between two points can't be less than the total distance in the 2
commands, and different areas can't cover each other.
6.18.6.2 Delete areas
Send SMS command:"pspace+area name", tracker will reply:"noarea ok".
6.18.6.3 Rename and set distance
Send SMS command "pspace+old name;new name,distanceM" to tracker, if name
is not repeated and area doesn't cover others, it will reply "rename ok!" for successful configuration.
Example: Send" rename123456 Area01;school,800M ", it means the new area name is "school", and
covers area of a radius of 800 meters.
6.18.6.4 Activate multi-area management
Send SMS command "area+pspace+on" to tracker, it will reply "Area on ok!", when
tracker enter the pre set area, it will send SMS "area name+latitude & longitude" to all the authorized
phone number, and send same SMS when goes out of the area.
6.18.6.5 Deactivate Multi-area management
Send SMS command "area+pspace+off" to tracker, it will reply"area off ok!"
6.18.7
Movement alarm
6.18.7.1. Set up: when the unit stays immobile in a place for 3-10 minutes with GPS signal reception,
the user can send SMS“move+pspace+0200” to the tracker (Suppose area of a radius of
200 meters, it supports 4 digits at most. Unit: Meter). It will reply “move OK”. In case of such a
movement (the default distance is 200m), it will send SMS “Move+ latitude & longitude” to the
authorized numbers at interval of 3 minutes.
6.18.7.2 Cancel: Send SMS “password” to device.