7.24.2
Short press
on the first remote controller, programming for the first remote controller is
successful after siren beeps 1 time.
7.24.3
Short press
button on the second remote controller, programming for the second remote
controller is successful after siren beeps 1 time.
7.25.
Electric lock and Vapor lock switch
7.25.1
Send command “lpspace+1”, tracker will reply “locktype ok”, switch to vapor
lock in 5 seconds.
7.25.2
Send command “lpspace+0”, tracker will reply “locktype ok”, switch to electric
lock in 0.5 seconds, electric lock is the default one.
7.26.
Arm/lock
（
All lock/unlock functions need the optional central lock
relay )
7.26.1.
arm/lock door by SMS
Send SMS command “arm+password” to the tracker, the terminal of vehicles will change to arm state,
Meanwhile, car door is locked, and it will reply SMS “Tracker is activated”.
If the vehicle are in ignition state (ACC is ON), car door will be locked, but ARM will fail, Meanwhile , it will
reply SMS “set up fail! pls turn off ACC”.
If engine turn off, but door is open, then the car can’t enter ARM state and reply “setup fail, pls close the
door.”
7.26.2.
Arm / lock door by remote controller
In disarm mode, short-press remote control button
,the door of the vehicle will lock, and tracker changes to
arm states, siren beep 1 time, no SMS message.
If the vehicles are in ignition state (ACC is ON), fail to change to arm state, but door will be locked, siren will
not beep.
If car door is not closed, siren will beep for 3 times.
7.27.
Disarm
7.27.1.
Disarm / unlock door by SMS
Send SMS command "password" to the tracker device in the vehicle, It will reply “Tracker is deactivated”
in both armed and disarmed state, and the SMS command will make the tracker device enter into disarmed state if
the unit currently armed.
It won’t alarm if the door is open and sensor is vibrated and the engine is started when deactivated this arm
function.
7.27.2.
Disarm / unlock door by remote controller
Short press
button in ARM state to enter DISARM state, siren beeps 2 times.
