Page 14 of 26
9033-SD Owner’s Manual
••••
(V 1.1)
Proc Phase
This is Chroma (C channel) phase adjustment, expressed in degrees, ranging from –360 to +360 in
steps of one degree.
Audio Submenu
Menu Structure
Parameter Type
Enbl
Embedded Group Enable
Src Output
Source
Gain Output
Gain
Grp1
Ch01-
Ch04
(x4)
Pol Output
Polarity
Enbl
Embedded Group Enable
Src Output
Source
Gain Output
Gain
Grp2
Ch05-
Ch08
(x4)
Pol Output
Polarity
Enbl
Embedded Group Enable
Src Output
Source
Gain Output
Gain
Grp3
Ch09-
Ch12
(x4)
Pol Output
Polarity
Enbl
Embedded Group Enable
Src Output
Source
Gain Output
Gain
Embd
Grp4
Ch13-
Ch16
(x4)
Pol Output
Polarity
Aud
Tone
TG1-TG4
(x4)
Tone Frequency
Embedded Group Enable
Enables or disables the embedding of a particular embedded audio group. Disabling a group preserves
the settings of the channels belonging to that group.
Output Source
Because the cards audio system functions like a router, each output can be sourced from any input
channel. This parameter lets you choose from the many different sources. Here is an explanation of the
different source names:
Source Name Description
EmXX
Input embedded audio channel XX (1 through 16)
AeXX
Discrete AES channel XX (1 through 16)
AnX
Analog Audio channel X (1 through 8)
TgX
Test Generator channel X (1 through 4)
Output Gain
The gain of each output is adjustable from +30 dB to –100 dB in 0.1 dB steps. After –100 dB gain is
set to –Inf, which means that output is present, but muted.
Output Polarity
If set to “Norm” output polarity is the same as input polarity, if set to “Inv” the output polarity is
inverted. This can be used to correct polarity errors in the input signals fed to the card.
