Cobalt Digital Inc BBG-1070-QS Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 92

background image

BBG1070QS-OM (V1.8)

BBG-1070-QS PRODUCT MANUAL

3-61

Setup/Operating Instructions

Front Panel User Menus

Front Panel User Menus

Some of the mode and parametric controls available using the web UI (as
described in Front Panel User Menus) are available using the front panel
display and arrow navigating buttons.

The front panel menus offers a true standalone means to configure the
BBG-1070-QS with no connection to a network required, and is useful where
changes need to be done immediately (or in emergency situations) without the
benefit of network access. However, the web GUI provides greatly simplified
user interfaces as compared to using this menu and the arrow controls. For
this reason, it is strongly recommended that the web GUI or DashBoard
remote control be used for all applications other than the most basic cases.

Troubleshooting

This section provides general troubleshooting information and specific
symptom/corrective action for the BBG-1070-QS and its remote control
interface. The BBG-1070-QS requires no periodic maintenance in its normal
operation; if any error indication (as described in this section) occurs, use this
section to correct the condition.

Error and Failure Indicator Overview

The BBG-1070-QS itself and its remote control provide error and failure
indications. Depending on how the BBG-1070-QS is being used (i.e,
standalone or network controlled), check all available indications in the event
of an error or failure condition.

The various BBG-1070-QS device and remote control error and failure
indicators are individually described below.

Note:

The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.

• Basic Troubleshooting Checks (p. 3-63)

• BBG-1070-QS Processing Error Troubleshooting (p. 3-63)

«
...
81
82
83
84
85
...
»

Содержание BBG-1070-QS





























































































Отзывы:

Нет отзывов

Похожие инструкции для BBG-1070-QS

Бренд: Paradyne Страницы: 22

Бренд: Paradyne Страницы: 11

Бренд: Paradyne Страницы: 19

COMSPHERE 3550 Series

Бренд: Paradyne Страницы: 153

Jetstream CPX-1000

Бренд: Paradyne Страницы: 141

Бренд: Furuno Страницы: 24

Thin Client US310e

Бренд: NEC Страницы: 6

Optane Persistent Memory 200 Series

Бренд: Supermicro Страницы: 54

Бренд: Z3 Technology Страницы: 67

Бренд: Kaptia Страницы: 14

Бренд: HighPoint Страницы: 10

HHM Series HHM2409

Бренд: TDK Страницы: 2

PFC Chokes PFC3515V Series

Бренд: Delta Electronics Страницы: 1

Бренд: ADTRAN Страницы: 20

AirStation G54 WLA2-G54

Бренд: Buffalo Страницы: 8

Бренд: AES Страницы: 44

Бренд: Cypress Semiconductor Страницы: 9

Бренд: Aerotech Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды