Cobalt Digital Inc BBG-1034-AUD-PRO Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 114

Cobalt Digital Inc BBG-1034-AUD-PRO Скачать руководство пользователя страница 53

BBG-1034-AUDPRO-OM (V1.1)

BBG-1034-AUD-PRO PRODUCT MANUAL

3-21

Setup/Operating Instructions

BBG-1034-AUD-PRO Function Menu List and Descriptions

(continued)

• Real-Time Loudness Leveler Setup

Sub-Tab

(Option +DSP-RTLL only) Provides controls for setting up Real Time
Loudness Leveler loudness processing.

• Dolby

®

Digital Encoder Mode Setup

Sub-Tab

(Option +DSP-ENCD only) Provides controls for setting up Dolby Digital
Encoder mode and bit rate.

• Dolby Digital Encoder Metadata Setup

Sub-Tab

Table 3-1

BBG-1034-AUD-PRO Function Menu List — continued

• Enable sets RTLL to enabled or bypassed.
• Dialogue Intelligence, when enabled,

allows loudness processing speech-gating
that measures and adjusts loudness only
during segments that contain dialog.

• Peak Limit applies a peak compressor/

limiter if the selected threshold is exceeded.

• IRL Source; Manual IRL allows IRL from

Auto, Dialnorm, or Manual.

• Aggressiveness adjusts how fast and

deep loudness leveling is engaged.

Note: Default settings are recommended and
conform to ATSC A/85.
Note: The level displays that appear are not
user-facing units such as dBFS or percent.
Note: Parametric controls described here
apply to -5.1 and -2.0 RTLL versions.

• Metadata Source (currently, only Internal is supported).
• Encoder Format selects from Dolby Digital or Dolby Digital Plus modes.
• Data Rate selects max bit rate allowed.
• Effective Data Rate display shows bit rate being used.
• Encodes Attempted display shows number of encode frames attempted.
• Encodes Succeeded display shows running number of encode frames successfully

generated.

Note: Parametric controls described here apply to -5.1 and -2.0 ENCD versions.

Contains conventional suite of
Dolby Digital metadata setup
controls and drop-downs.

Note: Parametric controls
described here apply to -5.1 and
-2.0 ENCD versions.

«
...
51
52
53
54
55
...
»

Содержание BBG-1034-AUD-PRO



















































































































Отзывы:

Нет отзывов