Cobalt Digital Inc BBG-1002-UDX-FS, Руководство по эксплуатации продукта

Страница: 50 / 110

3
BBG-1002-UDX-FS Function Menu List and Descriptions
3-20
BBG-1002-UDX-FS PRODUCT MANUAL BBG-1002-UDX-FS-OM (V1.0)
Input Audio Routing/Controls
Provides audio routing, gain, per-channel/bulk audio
delay controls, and audio meters. These controls route
selected audio sources onto the 16-channel internal
bus (which is used for all audio processing).
Note:
Input Audio Routing/Controls tab has identical independent controls for both Path 1 and Path 2 using the Path 1 /
Path 2 sub-tabs. Therefore, only the Path 1 controls are shown here. Set controls for other path using the respective
sub-tab.
Table 3-2 BBG-1002-UDX-FS Function Menu List — continued
All audio inputs are transferred through the
device via each path’s 16-channel Internal Bus
(Bus Ch 1 thru Bus Ch 16).
The example above shows various Source
selections that direct Emb Ch 1 thru Ch 6 and
AES Ch 1 and Ch 2 onto the internal bus
(unused bus channels can be set to Silence or
Mute).
Each bus channel provides Gain, Mute, and
Invert controls.
The source-to-destination correlation shown
here is only an example; any of the sources
described on the following pages can route to
any of the internal bus channels.
Bus Ch 1
Bus Ch 2
Bus Ch 3
Bus Ch 4
Bus Ch 5
Bus Ch 6
Bus Ch 7
Bus Ch 8
Bus Ch 9
Bus Ch 10
•
•
•
Bus Ch 16
Silence
or Mute
AES Ch 1-2
Path 1
Emb Ch 1 – 6
Input Audio
Crosspoint
Path 1 Device 16-Ch
Internal Bus
(Gain, Mute, Bulk and
Channel Delay Controls)
• • •