Cobalt Digital Inc A40, Руководство пользователя, Страница: 91 / 136

Cobalt_OM_preprint_shell.fm Page 1 Wednesday, March 1, 2006 5:39 AM
A40 Owner’s Manual 3-35
O
PERATING
I
NFORMATION
MAIN CABIN BED
The main cabin area can be converted from a
sitting area to a sleeping area very easily.
1 – Locking clips
2 – Support pole
1. Release the locking clips for the table center
post and push down on the table top to lower it.
2. Once the table is down, tighten the locking clips
to hold the table top in the lowered position.
3. Install support pole in the slots under the
cushions.
4. Slide the center cushions on top of the table
and over the support pole.
SECOND BED
The seating area below the galley can be converted
to a bed.
1. Lift up on the center support bracket and swing
it out.
2. Support the end of the bracket under the
cushion on the other side.
3. Slide the cushions together until they meet in
the center.
WINDLASS
The anchor must be secured with anchor snubber
(clip, shackle, or other part with short piece of line)
when it is stored to prevent accidental deployment.
When anchor is deployed and in use, the rode
(rope or chain) must be secured to a cleat or secure
holding point. Do not use windlass to hold vessel.
COB_0375_A
1
2
COB_0376_A
COB_0392_A