Cobalt Digital Inc A28, Руководство пользователя

Страница: 98 / 140

Cobalt_OM_preprint_shell.fm Page 2 Wednesday, March 1, 2006 5:39 AM
3
-
42 A28 Owner’s Manual
COBALT
A28
BOWRIDER
S
ECTION
3
Recommissioning the Manual Sunshade
System
Inspect the canvas at full extension to make sure
there are no deteriorating portions of the canvas
(canvas rips, broken threads, etc.). The actuators
for the manual sunshade system are spring-loaded
and controlled extension of the shade is dependent
on the canvas, roller and gearbox. Therefore, it is
important to ensure the canvas is in good condition
to maintain proper movement of the framework.
Cleaning
SureShade sunshade systems use Sunbrella®
fabrics for canvas and we recommend following
Sunbrella's basic canvas care and cleaning
instructions to prolong the life of the canvas.
Basic canvas care includes:
• General, light cleaning with a hose on a
monthly basis with clear water to remove
debris
• A thorough cleaning every 2-3 years, which
may include fabric guard and/or mildew
treatment
• SureShade does not recommend removing
canvas from the SureShade roller system, as it
may be difficult to properly re-install or it could
damage the rollers.
• Under no circumstances should the canvas
supplied with any SureShade system ever be
placed in a washing machine.
See Canvas in the Interior/Exterior Care section of
this manual for more cleaning instructions of your
SureShade Sunbrella canvas.
For more information about your SureShade go to
http://www.sureshade.com/customer-resources.
ECLIPSE ARCH W/BIMINI
1. Fold aft bimini bow toward the back of the boat.
2. Remove canvas boot.
3. Unfold canvas and deploy over the top of the
arch, and put the hole in the canvas over the
anchor light on top.
4. Move forward bimini bow to top quick release
position, and attach the short bimini poles to the
forward bow and quick release.
5. Unzip forward bow support pocket on the
canvas and put over forward bimini bow and
rezip canvas.
6. Pull the aft end of bimini down tight using
adjustable poles to hold tight.
ELECTRIC ECLIPSE ARCH
WITH BIMINI
1. To raise and lower, turn on the master switch in
the helm area, and raise and lower with the
switch located in the aft walk-thru area.
2. Fold aft bimini bow toward the back of the boat.
3. Remove canvas boot.
4. Unfold canvas and deploy over the top of the
arch, and put the hole in the canvas over the
anchor light on top.
5. Move forward bimini bow to top quick release
position, and attach the short bimini poles to the
forward bow and quick release.
6. Unzip forward bow support pocket on the
canvas and put over forward bimini bow and
rezip canvas.
7. Pull the aft end of bimini down tight using
adjustable poles to hold tight.