Cobalt Digital Inc 9971-MV -4K Series, Руководство по эксплуатации продукта

Страница: 55 / 62

9971-MVX-OM (V1.0B PRELIM) 9971-MVX PRODUCT MANUAL
3-29
Setup Instructions
9971-MVx-4K Function Menu List and Descriptions
Presets
Allows user control settings to be saved in a one-button
Preset and then loaded (recalled) as desired, and
provides a one-button restore of factory default settings.
• Preset Save / Select / Load Controls
Table 3-1 9971-MVx-4K Function Menu List — continued
• Pressing Save Preset opens field for entering user-defined
Preset Name for the preset being saved (in this example,
“Profile 1A”). Up to 128 individual presets can be saved.
• Load Selected Preset button allows loading (recalling) the
selected preset. When this button is pressed, the changes
called out in the preset are immediately applied.
• Clear Preset button deletes the currently selected preset.
• Modify Preset button allows currently-selected preset to take
in current changed settings and nest the changes in the
selected preset.
• Restore Factory Defaults button allows loading (recalling)
the factory default preset. When this button is pressed, the
changes called out in the preset are immediately applied.
• Download saves all individual presets to a .bin file to be
downloaded to a connected computer.
• Preset: drop-down allows a preset saved above to be
selected to be loaded, modified or cleared.
(In this example, custom preset “1: Profile 1A” can be
selected and then loaded, modified, or cleared by
pressing the respective button.)
Preset Layers allows selecting a
functional layer (or “area of concern”)
that the preset is concerned with.
Limiting presets to a layer or area of concern allows for highly specific presets, and masks changing card settings in areas outside
of the layer or area of concern.
Download (save) card presets to a network
computer by clicking Download Presets –
Save at the bottom of the Presets page.
Browse to a desired
save location (in
this example, My
Documents\Cobalt
Presets).
The file can then be
renamed if desired
(RCVR21 Presets
in this example)
before committing the save.
Upload (open) card
presets from a
network
computer by clicking
Upload
at the bottom of
DashBoard.
Browse to the
location
where the file was
saved
on the computer or
drive (in this
example, My
Documents\Cobalt Presets). Select the desired file and
click Open to load the file to the card.
Note: • Preset transfer between card download and file upload is on a group basis (i.e., individual presets cannot be downloaded
or uploaded separately).
• After uploading a presets file, engagement of a desired preset is only assured by selecting and loading a desired preset
as described above.