V0.8
Page 6 of 13
Cobalt Digital 2005
Configuring a 5821-D
The 5821-D is configured via an eight position card edge switch for main functions, a ten position surface
mount board switch for extended functions and two card edge rotary switches with an up down switch to
access advanced controls. The configuration is broken down into four areas: HD/SD conversion mode,
Aspect ratio rules (ARC), output configuration and overlay reticules.
Switch 9 on Card Edge
1
2
3
4
5
6
7
8
SETTINGS
ON
ON
SD to SD User Settings (default: 0.75H pillar box*)
ON
OFF
SD to SD 0.75 Vert Reduction (letter box)
OFF
ON
SD to SD 1.33 Horz Expansion (center cut)
OFF OFF
SD to SD No Aspect Change.
ON
ON
HD to SD User settings (default: 0.75H pillar box*)
ON
OFF
HD to SD 0.75 Vert Reduction (letter box)
OFF
ON
HD to SD 1.33 Horz Expansion (center cut)
OFF OFF
HD to SD No Aspect Change
ON
Underscan ON (10% overall)
OFF
Underscan OFF (10% overall)
ON
Reticules 4x3 Safe Area ON
OFF
Reticules 4x3 Safe Area OFF
ON
Reticules 4x3 Full Aperture ON
OFF
Reticules 4x3 Full Aperture OFF
ON
Reticules 16x9 Safe Area ON
OFF Reticules 16x9 Safe Area OFF
v
••••
If user mode has been adjusted off of the default of 0.75H, then do a factory restore to return to 0.75H.
Switch 3 on PCB
1
2
3
4
5
6
7
8
9
10
SETTINGS
ON
Reticules User Settings
OFF
Reticules Factory Settings
ON
Reticules Shadow Enabled
OFF
Reticules Shadow Disabled
ON
Reticules Center Cross ( + ) ON
OFF
Reticules Center Cross ( + ) OFF
ON
Reticules Tracking ON (follows ARC)
OFF
Reticules Tracking OFF (follows ARC)
ON
ON
Reticule Color – WHITE
ON
OFF
Reticule Color – BLACK
OFF
ON
Reticule Color – BLUE
OFF OFF
Reticule Color – RED
ON
Enable Reticule on SDI output
OFF
Disable Reticule on SDI output
ON
Enable Reticule on Analog output
OFF
Disable Reticule on Analog output
ON
SD Analog Color ON
OFF
SD Analog Color OFF (B&W)
ON
Enable External Ref
OFF Disable External Ref
