Cobalt Digital Inc 323 Day Cruiser, Руководство пользователя

Страница: 123 / 144

Cobalt_OM_preprint_shell.fm Page 1 Wednesday, March 1, 2006 5:39 AM
323 Owner’s Manual 5
-
7
I
NTERIOR
/E
XTERIOR
C
ARE
To extend the life of your gelcoat finish, use a
Cobalt marine mooring cover totally covering the
top deck of the boat for maximum protection.
Additionally, if your boat is to be stored where the
sun is constantly on the side or transom of the boat,
you should consider having some custom skirting
made to complement the mooring cover.
Tonneau covers will supply adequate short term
protection to the interior, but will not protect the
gelcoat finish. Please check with your authorized
Cobalt dealer for more information on the subject.
STAINLESS STEEL AND
CHROME
Stainless steel, though highly resistant, is still
capable of rusting, particularly in the marine
environment. Initial signs of rust and corrosion, left
untreated, may result in pitting and permanent
damage to components. Keep your stainless steel
looking new by cleaning monthly with a good
quality stainless steel cleaner or polish. Always
clean and polish in the direction of the grain and
finish.
The following steps will help protect against such
occurrences:
Preventive Steps
Clean and wax metal brightwork prior to extended
storage. In saltwater or other harsh environments,
repeat more often as needed. High-quality
stainless steel cleaners and conditioners are
commercially available. Rinse with fresh water and
wipe dry with towel or chamois after each use.
Cleaning Stainless Steel
Remove rust or corrosion promptly using a good
metal cleaner/polish. Delay may contribute to
permanent finish damage. Do not use steel wool or
other coarse abrasives, or clean with acids or
bleach. DO NOT use cleaners that are not for use
on stainless steel, such as glass, tile or counter
cleaners, or citrus-based cleaners. These types of
cleaners can damage the surface permanently.
Apply metal or automotive wax after cleaning for
additional protection. Always test any product in an
inconspicuous area before applying to the complete
surface.
Should you have reason to replace hardware or
fasteners, be certain that replacements are correct
materials. See your authorized Cobalt dealer for
further information.
CORROSION PROTECTION
CorrosionX
One of the issues associated with owning a boat is
corrosion, which, ironically, is often caused directly
by the marine environment. If you operate a boat in
salt water, you will be surprised by the excessive
corrosion in just a few weeks. Since we recognize
that your purchase of a Cobalt boat was a major
financial decision, we want you to be happy with
your choice for years to come. After consulting with
our dealers and operators throughout the country,
we found that regular applications of a product
called CorrosionX will keep your boat operating at
peak efficiency, free of corrosion. To assist you, we
have included a small can of CorrosionX in the
optional saltwater kit. Minimally, it should be applied
to the following areas and components in the time
frames specified:
A
DANGER
Avoid fire, explosion or exposure to
toxic materials. Some or these solvents
are highly flammable and toxic. Exercise
proper care in cleaning, wear protective
gear and provide adequate ventilation.
DO NOT store soiled rags onboard;
store or dispose of rags properly
ashore.
CAUTION
Use caution in cleaning around
stitching, wood or other decorative trim,
since these solvents could seriously
damage these materials.