Cobalt Aquatics C-VUE 18, Руководство по сборке

Страница: 2 / 16

2
Door Hinges
Camlocks
Camlock Screws
½” Hinge Screws
1” Cabinet Foot Screws
Plastic Cabinet Feet
Stand Panels
C-VUE STAND PARTS LIST
Special Note on installing Camlock screws
When installing camlock screws into pre-installed
nylon adapters. Be sure not to over tighten, or cams
will not engage correctly.
Thread camlock screws straight up and down as
possible and only screw in just to the point where
you cannot see thread any more. If cam will not en-
gage during assembly, then you must unscrew the
camlock screw slightly until the head of the screw
and engage with cam.
Over tightening the camlock screws can also cause
damage to the outer finish of stand, this kind of
damage is not covered by warranty.