1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1(BOX 1) - HARDWARE PACK IS LOCATED IN 223561Q (B1)
1
BOLT
(
∅
5/16" x 50MM- RBW)
10PCS
2
LOCK WASHER
(
∅
5/6" - RBW)
10PCS
3
FLAT WASHER
(
∅
5/16" - RBW)
10PCS
4
ALLEN WRENCH
(4MM - RBW)
1PC
Z-B3(BOX 3) - HARDWARE PACK IS LOCATED IN 223561Q (B3)
5
THREADED BOLT
(
∅
5/16" x 3-1/2" - RBW)
8PCS
6
HEX NUT
(
∅
5/16" x 14mm - RBW)
8PCS
7
WRENCH
(14MM - RBW)
1PC
HALF ROUND NUT
(
∅
5/16'' - RBW)
8PCS
9
FLAT HEAD SCREW
(
∅
4 x 30mm - RBW)
8PCS
NOTE:
COASTERFURNITURE.COM
PAGE 3 OF 5
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly
.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ITEM:
223561Q(B1-B3)
8
