Coaster Dining Side Chair, Руководство по сборке

Страница: 2 / 6

LOWER LEG FRAME
UPPER LEG FRAME
1PC
WOOD CLEAT
SEAT AND BACK
1PC
1PC
NOTE :
Phillips head screw driver is required in the assembly process.However,manufacturer does not provide this item.
Quantities shown are for one chair.
HARDWARE IDENTIFICATION
AN
BOLT
(M6 x 70mm - RBW)
ALLEN WRENCH
(M4 x 110mm - BLK)
4PCS
1PC
PARTS IDENTIFICATION
BN
1
2
3
5
ASSEMBLY TIME
10 MINUTES
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
PAGE 2 OF 5
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS :
WARNING !
CN
DN
LOCK WASHER
(1/4" - BLK)
2PCS
4
4PCS
8PCS
1PCS 6
FLAT WASHER
(M6 x 13mm - RBW)
ALLEN HEAD SCREW
(M7 X 50MM ZB(10#) - ZB)
PAN HEAD SCREW
(M4 x 30mm-BLK)
4PCS